See larger image
Leave Messages
Products DetailTJ-DBH Air Disc Brakes (Horizontal-type)
The type brake is for horizontal-type installation, it can provides approximately 2 times of braking powder than vertical installation.
Add the expandable shrapnel to guarantee the brake balance, brake-disk thickness also covers from 10mm to 20mm.
Factory Directly Produce Air Disc Brake,Pneumatic Disc Brake(Pneumatic Applied/Sprig Release Brake)
Pneumatically Applied Brakes are best suited for light to medium stopping duties and for tensioning applications where a high degree of control is required.Pneumatic Disc Brakes are widely used for speed reducing, stopping/braking of the low or medium torque driving mechanism. The brakes can also be applied as tension brake on winding machineries, such as: paper-web tension control, news paper publishing tension control, steel unwind control, wire and cable reel unwind tension etc. |
Features for Pneumatic Applied Brakes Include:
When it is not possible to apply a disc with a required diameter, it is enough to apply more than one clamp. This type of brake is also very suitable in case that work involves a constant pull on the material, but a pressure regulator is required.The assembly of these brakes does not require any particular attention thanks to the new self-aligning system with orthogonal sliding which allows an automatic brake-disc alignment. |
Caliper brakes can have two operating modalities:
|
Standard Size brake discs available and Customised can be manufactured. |
We also have these types air disc brakes.
 |  |  |  |  |
TJ-DBK DBK Air Brakes(Type Of Cooling And Fan) | TJ-DBK\10DBK20.2\DBK20.4 Air -actuated Disc Brakes | TJ-DBM DBM oil hydraualic disc brake | TJ-DBF DBF Air disc brake | TJ-DBC DBC Air Disc Brakes |
Factory Directly Produce Air Disc Brake,Pneumatic Disc Brake(Pneumatic Applied/Sprig Release Brake)
Pneumatically Applied Brakes are best suited for light to medium stopping duties and for tensioning applications where a high degree of control is required.Pneumatic Disc Brakes are widely used for speed reducing, stopping/braking of the low or medium torque driving mechanism. The brakes can also be applied as tension brake on winding machineries, such as: paper-web tension control, news paper publishing tension control, steel unwind control, wire and cable reel unwind tension etc. |
Features for Pneumatic Applied Brakes Include:
When it is not possible to apply a disc with a required diameter, it is enough to apply more than one clamp. This type of brake is also very suitable in case that work involves a constant pull on the material, but a pressure regulator is required.The assembly of these brakes does not require any particular attention thanks to the new self-aligning system with orthogonal sliding which allows an automatic brake-disc al |
