Taiwan Tianji Electromagnetic Clutch and Electromagnetic Brake are general-purpose transmission equipment, which are widely used in printing machinery, packaging machinery, automation equipment, machine tools and other fields. All of the above-mentioned industrial machinerys need to be applied to the electromagnetic clutches and brakes of the transmission equipment, and they need to be used in the course of operation. For example, the service life of the electromagnetic clutch and the electromagnetic brake is one of them.

So how to guarantee the life of electromagnetic clutch and electromagnetic brake? Consider the following aspects that affect service life:

1. It is related to the friction materials of electromagnetic brakes and electromagnetic clutches. The use of new friction materials has a longer life than conventional friction materials.

2 It is related to the load characteristics. It is related to the dynamic load torque and the static load torque. The load is large, the sudden increase occurs, and the unloading mode is incomplete. It also has a great influence on the life of the electromagnetic clutch and the electromagnetic brake.

3. It is related to the reaction time of the electromagnetic clutch and the electromagnetic brake, that is, the energization pull-in and the power-off release time are short, otherwise the electromagnetic clutch brake life will be shortened.

4. It is related to the life of the brush material. The better quality brush material can extend the service life of the electromagnetic clutch and the electromagnetic brake.

It should be noted that the electromagnetic clutch and electromagnetic brake should not be installed close to the place where oil and lubricating oil splash. The electromagnetic clutch and the electromagnetic brake can be mounted on the coaxial or mating shaft. When mounted on the docking shaft, the coaxiality of the two shafts must be ensured. After the electromagnetic clutch and the electromagnetic brake are installed, no friction should occur between the yoke and the moving plate, but the clearance should not exceed 0.3 to 1.5. The clearance between the moving plate and the armature shall be as specified in the table. In addition, the use of the environment should try not to have oil and other oil, especially oil can not contaminate the electromagnetic clutch and electromagnetic brakes. The above mentioned conditions will affect the service life of the electromagnetic clutch and the electromagnetic brake.

More types and specifications of products Selection, quotation, order welcome to consult!!!

Click on Tianji Brand Electromagnetic Clutch Product: http://www.tianjidg.com/list_35.html

Click on Tianji Brand Electromagnetic Brake Product: http://www.tianjidg.com/list_34.html